How to manufacture your PCB

Venders we've had experiences with.

Advanced Circuits

Tech Circuits

http://www.techcircuits.com/prodserv.php

Gold Phoenix Must buy Panel,

1-2 layer 155sqin ($110) 100sqin ($100) 5 day 2-4 layer 155sqin ($300) 100sqin ($280) 75sqin ($250) 6 day

   * 2 or 4 layer boards - 0.062" FR4 material
   * 2 Layer sizing:
         o 7mil (~0.2 mm) spacing minimum
         o 7mil (~0.2 mm) traces minimum
         o 15mil (~0.5 mm) minimum drill size
   * 4 Layer sizing:
         o 7mil (~0.15 mm) spacing minimum
         o 7mil (~0.15 mm) traces minimum
         o 15mil (~0.33 mm) minimum drill size
         o No blind/buried vias
   * ???mil (~??.? mm) maximum drill size
   * All drill hits are plated through
   * Matte v-scored, Multipaneled
   * Board is routed to the indicated border (+$20)
   * Soldermask top side
   * 1oz Copper
   * No limit on the number of vias
   * No limit on pads or components
   * Multiple designs, multiple copies are allowed!

Batch PCB Boards can be as small as 0.5" (~12.7 mm) square.

   * 2 or 4 layer boards - 0.062" FR4 material
   * 2 Layer sizing:
         o 8mil (~0.2 mm) spacing minimum
         o 8mil (~0.2 mm) traces minimum
         o 20mil (~0.5 mm) minimum drill size
   * 4 Layer sizing:
         o 6mil (~0.15 mm) spacing minimum
         o 6mil (~0.15 mm) traces minimum
         o 13mil (~0.33 mm) minimum drill size
         o No blind/buried vias
   * 500mil (~12.7 mm) maximum drill size
   * All drill hits are plated through
   * No internal routes, no v-scoring, only drill files are sent to the fab house
   * Board is routed to the indicated border (very clean edges, you can get creative with the shape as well!)
   * Soldermask both sides
   * 1oz Copper
   * No limit on the number of vias
   * No limit on pads or components
   * Multiple designs, multiple copies are allowed!
   * Any size up to 10x15", measured in inch increments (254mm x 381mm)
   * Minimum billable size 1x1" (smaller boards are allowed but rounded up)
   * Your design can be any size - 1 inch is the minimum

$10 setup fee (shown as a handling charge) - $2.50 per square inch for 2 layer designs, $8.00/sq. in. for 4 layer designs.