Tiny Servo Driver
From CunningWiki
Revision as of 20:23, 6 December 2011 by Dye (Talk | contribs) (Created page with "== Overview == The Tiny Servo Driver is named after the ATTINY inside it. This board controls two servos for fun filled automatrons. It uses the ATTINY servo library written by I...")
Overview
The Tiny Servo Driver is named after the ATTINY inside it. This board controls two servos for fun filled automatrons. It uses the ATTINY servo library written by Ilya Brutman.
Assembly
Step 1 (Check the Parts List)
- make sure everything arrived
Step 2
- place the ic
Step 3
- place the low components in first
Step n
- place the taller components in last
Test
Connecting to power
- Wire a power source to this kit
Connecting a servo
- Connect this side
Change Modes
- Press the button for so many seconds
Downloads
Schematics
- v1.0(.png)
- v1.0(eagle files)
Software
- v1.0
Datasheets
- ATTINY
- FETS
- ETC
References
-Servos and pulse width