Radio Controlled Stepper Bill of Materials

From CunningWiki
Jump to: navigation, search

These are the parts needed to put together a Radio Controlled Stepper.

Image Name Description Distributor Part Number Qty
Parts 1x3Header.JPG
J2 1x3 Header Digikey 609-3464-ND 1
Parts 2x3Header.JPG
J1 2x3 Header Digikey 609-3210-ND 1
Parts ATTINY85.JPG
U1 ATTINY85 Digikey ATTINY85-20PU-ND 1
Parts C0.1uF.JPG
C1 0.1uF Digikey 478-5741-ND 1
Parts R10k.JPG
R3 10k Resistor Digikey RNF14FTD10K0TR-ND 1
Parts TactSW.JPG
S1 Tactile Switch Digikey P8009S-ND 1
Parts Diode.JPG
D2 D3 D4 D5 1N4004 Diode Digikey 641-1311-1-ND 4
Parts nFET.JPG
Q1 Q2 Q3 Q4 Transistor n-FET Digikey 497-2766-5-ND 4
Parts 3.5mmScrewTerm.JPG
J3 J4 J5 2pos 3.5mm screw terminal Digikey ED2635-ND 3
Parts RCSPCB.JPG
PCB Radio Control Stepper PCB Cunning Turtle Part Number ct-61