Dual Servo Controller Assembly Instructions

From CunningWiki
Revision as of 20:36, 14 January 2012 by Ilya (Talk | contribs) (Created page with "Before you begin soldering, spread out the parts you've received and make sure you have everything. You should have all the following components: [[File:Tiny Servo Driver 42.JPG|...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Before you begin soldering, spread out the parts you've received and make sure you have everything. You should have all the following components:

Tiny Servo Driver 42.JPG

For detailed information about each component check out the Tiny Servo Driver Bill of Material.


Now that you have everything lets begin. First, insert the the resistor into the PCB. Resistors are non-polar so they can be inserted in any orientation. To make to easier to insert the resistor, bend it into a staple shape, like this:

Tiny Servo Driver 01.JPG


Once the resistor is inserted, bend out its leads so that it stays in place.

Tiny Servo Driver 02.JPG