Confetti Cannons

From CunningWiki
Revision as of 14:31, 25 September 2011 by Dye (Talk | contribs) (Created page with "'''Materials''' *1x 3/4" Copper Tee *2x 3/4" Copper Cap *1x 3/4" Copper Elbow *3x 3/4" Copper Tube Type L (Cut to 1.5") *1x 3/4" Copper Tube Type L (Cut to 12") *1x M5 Bolt *2x...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Materials

  • 1x 3/4" Copper Tee
  • 2x 3/4" Copper Cap
  • 1x 3/4" Copper Elbow
  • 3x 3/4" Copper Tube Type L (Cut to 1.5")
  • 1x 3/4" Copper Tube Type L (Cut to 12")
  • 1x M5 Bolt
  • 2x M5 Nut
  • 2x M5 Washer
  • 2x M3 Bolt
  • 1x 1/4-20 Hex Bolt 2.5", threaded 3/4"
  • 2x 1/4-20 Nut
  • 1x 1.5" x 0.5" Aluminum
  • 1x AL C channel (Cut to 0.5")

Tools

  • Copper Pipe Cutter
  • Flux
  • Solder
  • Sand Paper
  • Torch
  • Vice (Used to hold Assembly)
  • Flame Resistance Surface ()
  • M5 Tapping Drill Bit
  • M5 Tap
  • M3 Tapping Drill Bit
  • M3 Tap
  • Drill Press (Optional)
  • Lathe (Optional)
  • Miter Saw with Carbide Blade (To cut Aluminum Pieces)