PBMinutes

From CunningWiki
Revision as of 14:19, 20 April 2012 by Dye (Talk | contribs)

Jump to: navigation, search

Camera Z Mount knobs hit each other (30min DYE)

  • Turn the second hole into a slot so it looks intentionally adjustable
  • Re-drill holes wider? (makes it look unintentional)

Camera Z Mount is too long (1hour DYE)

  • De-rivet right angle
  • Cut aluminum section
  • re drill, re-rivet piece in

Mount in Camera support rails (30min FRI)

  • drill slide rail holes
  • Rivet into box

Make Cap touch Sensor (1 hour DYE)

  • step 1) print out a stencil
  • step 2) tape a copper sheet onto the back of the stencil
  • step 3) cut out stencil
  • step 4) apply PSA to top of the copper tape
  • step 5) peel off PSA protector and stick to polyethalyne
  • step 6) scratch off paper using knife or water (only enough to solder to)
  • step 7) solder a 30awg or smaller wire to that electrode
  • step 8) add a female header socket to the end of the 30 gauge wire
  • step 9) add more PSA
  • step 10) add 1/4" polyethalyne to back of sensor to protect it
  • step 11) add a LED, EL, matrix or other type of back light to illuminate this assembly

Make new front panel (1 hour DYE)

  • cut wood to size
  • cut plastic to size
  • apply adhesive to surface and install window

Install Monitor (2 hour FRI)

  • Cut out hole
  • Design and install retention system
  • must be removable

Need LED Ring (4 hours FRI)

  • make template
  • stack 3 1/8" sheets together
  • cut out template
  • drill 40 holes
  • Wire in 40 LEDs common cathode.
  • Wire 5 drive circuits

Need to design door (2 hours DYE)

  • Need to cut door out
  • install piano hinge
  • install rigid extrusions
  • install backing
  • install combi-lock

Need Foot Stands (30 mins DYE)

  • Lathe
  • 4 Delrin holes

Need a curtain and backdrop (FRI)

Need to add Threaded Rivets for Future Expansion

Need to add top optical exit window for vertical flash system

Need a mechanism to lock booth down

Need lift handles

Need to buy backdrop

[done]Need wheels

[done]Need pull handle

[done]Need to buy and laminate wood